  |
Back Plug
Adapter This adapter will
plug into the antenna port on the UPPER BACK portion of
your phone. A rubber or plastic plug may need to be removed.
Press firmly to ensure a good connection - sometimes slight
twisting is necessary. Using too much force could damage your
phone. |
  |
Bottom Plug
Adapter
This
adapter will plug into the BOTTOM of your cell phone.
Push until you hear a click. Press button(s) in middle or on
sides to release the adapter from the phone.
|
  |
Ring
Adapter
This
adapter slides onto your cellular phone's existing built in
antenna. Press down firmly to ensure a good
connection. Be sure to lower your phone's built in
antenna if applicable. This adapter does not use a physical
connection. Effectiveness of this adapter varies from phone to
phone and provider?s signal strength. This adapter couples
with the internal antenna located at the back of compact cell
phones. |
  |
Coupling
Adapter
This adapter will
slide onto the TOP BACK of your cell phone. The sleeve
may fit upside down but it may not function properly. This
adapter does not use a physical connection. Effectiveness of
this adapter varies from phone to phone and provider's signal
strength. This adapter couples with the internal antenna
located at the back of the compact cell phones. |
  |
Top Plug
Adapter
Plugs into the
adapter port on the TOP of your phone. A rubber
plug may need to be removed. Press firmly to ensure a
good connection - do not twist. Using too much force
could damage your phone. A small number of top plug
phones require the removal of the original antenna to expose
the port. |
  |
Top Plug
w/Ring
This adapter has a
ring that slides over your existing antenna, while it plugs
into the antenna port on the TOP of your
phone. A rubber plug may need to be
removed. Press firmly to ensure a good connection -
sometimes slight twisting is necessary. Using too much force
could damage your phone. |
 |
Top Replacement
Adapter
This adapter comes
in 3 parts. (A) A replacement antenna mount base,
(B) An antenna cable, and (C) A replacement
antenna. You will first need to take a safety pin and place it
inside the hole on the existing antenna mount base while
forcefully pulling out the original antenna.
Remove the existing antenna mount base and replace it with the
new antenna mount base, making sure the gold pins are facing
the phone. You will need the replacement antenna after
disconnecting your antenna adapter. You can interchange the
antenna cable and the replacement antenna as needed onto the
new antenna mount base. |
  |
Top Screw
Adapter
This antenna
adapter replaces your cellular phone's original antenna.
Unscrew your original antenna and screw in the antenna
adapter. Be sure to save your original antenna - you
will need to use it after disconnecting your antenna
adapter. |
  |
Side Plug
Adapter
Plugs into the
adapter port on the UPPER SIDE of your phone. A
rubber plug may need to be removed. Press firmly to
ensure a good connection - sometimes slight twisting is
necessary. Using too much force could damage your
phone. |
  |
Clamp w/Back Plug
Adapter
This adapter has a
clamp that attaches onto your existing antenna, while the
contact pin connects into the antenna port on the back of the
phone. A rubber or plastic plug may need to be
removed. |
  |
Universal Patch
Coupling Adapter
This adapter
couples with the internal antenna located at the back of
compact cell phones. This patch mount comes with Velcro tape
that adheres to the back of cell phones. The adapter
then attaches to your cell phone when you want to connect
either to an antenna or one of our cell phone booster
amplifiers. This adapter does not use a physical
connection. Effectiveness of this adapter varies from phone to
phone and provider?s signal
strength. |
