Mobile Phone
Signal Repeaters
Aerials/Antennas Fixed wireless terminals Cabling DockNTalk products Bespoke Systems & Engineering Phone Jamming Accessories FAQ forum Media Warranty Equipment leasing References

BBC NEWS - Interview with Cellantenna CEO Howard Melamed

tel. +44 (0) 203 142 6436

fax +44 (0) 208 181 6254

If you want to be updated about our special prices, sales, promotions and new products, please sign up for our newsletter below

Email:



Mobile COMBINERS / DIVIDERS/
CROSS BAND PCS / Mobile COUPLERS




Mobile Combiners / Dividers

Combines signal from multiple antennas or amplifiers, and, can divide signals to multiple antennas or amplifiers. These high quality coaxial dividers/combiners/Couplers are offered in various configurations covering full octave bands from 700Mhz to 2.5 GHz. These units are ideally suited for use in GSM 900/1800MHz and Wi-Fi systems. All have N female terminations, can handle 10 watts of power and provides 20dB of isolation between ports. Use two, three or four Mobile phones, or Mobile-based equipment such as a security system, or Wi-Fi routers and amplifiers, simultaneously with one antenna system.

Due to insertion losses, only use with our high performance Yagi , Panel and Fiberglas Mobile High Gain Antennas, and Signal Booster Amplifiers.


Model: CAP210



Type: 2-Way Combiner

Frequency: 700-2500 MHz

Impedance: 50 ohms

Max Input Power: 10w

Connectors: N Female

Total Loss: 3.5dB

43.95 GBP + VAT + Shipping



Model: CAP310



Type: 3-Way Combiner

Frequency:700-2500 MHz

Impedance: 50 ohms

Max Input Power: 10w

Connectors: Type "N" Female

Total Loss: 5.5dB

49.95 GBP + VAT + Shipping



Model: CAP410



Type: 4-Way Combiner

Frequency: 700-2500 MHz

Impedance: 50 ohms

Max Input Power: 10w

Connectors: N Female

Total Loss: 6.7dB

54.95 GBP + VAT + Shipping




Cross Band PCS / Mobile Couplers

This cross band coupler is used to combine GSM and DCS signals coming from either separate antennas or separate amplifiers into one coaxial cable. The coupler can also separate a combination of GSM and DCS signals from one cable to a low GSM port and a High DCS port. It can be used in conjunction with our power dividers to develop dual band boosters or repeater systems. The N-Female ports have 60 dB of isolation between the Hi and Low bands and very low insertion losses (3 dB).


Model: CADP-800/2.5 Coupler 800/1900 /2.4 WI-FI Signal




Type: Diplexer

Frequency: 800-960 MHz Low / 1710-2200 MHz High

Impedance: 50 ohms

Max Input Power: 150w

Connectors: N Female

Insertion Losses: 3dB Isolation: >60dB

VSWR: <1:1.5

Isolation: >45dB

VSWR: ≤1.35:1

174.95 GBP + VAT + Shipping



Model: CADP822 Combines 2 bands, PCS and Mobile into one cable




Type: Cross Band Coupler

Frequency:800-960 MHz Low / 1710-2200 MHz High

Impedance: 50 ohms

Max Input Power: 150w

Connectors: N Female

Insertion Losses: 3dB Isolation: >60dB

VSWR: <1:1.5

159.95 GBP + VAT + Shipping





Power Dividers



Model: CA-DC6 Power Divider




Type: Power Divider

Frequency:800-2200 MHz

Impedance: 50 ohms

Connectors: N Female

99.95 GBP + VAT + Shipping





Model: CA-DC10 Power Divider




Type: Power Divider

Frequency:800-2200 MHz

Impedance: 50 ohms

Connectors: N Female

99.95 GBP + VAT + Shipping





Model: CA-DC15 Power Divider




Type: Power Divider

Frequency:800-2200 MHz

Impedance: 50 ohms

Connectors: N Female

99.95 GBP + VAT + Shipping






Copyright by CellAntenna.co.uk 2010
Solution Graphics CellAntenna credit card options