For homes and 10
people offices. Up to 250 Square Meters
Price:
399
SALE £349
+ VAT + Shipping
|
Don't know which system you need for the mobile phone service
provider you are subscribed to? We do! Email us at
|

Now an
affordable solution to solve the dropped call and no signal problem in
your home. The CAE50 packages are easy to install and will
increase your signal strength 1000%. The expected area of coverage is
250 square meters.
At the heart of this
repeater is a 50 dB gain
bi-directional amplifier increasing the signal strength. We supply
an external aerial (Yagi and Panel). The aerial comes with
10m of low loss cable complete with the connectors already
attached. You install the aerial outside on the wall or on a roof
edge. Run the supplied 10m special
low loss cabling to the inside of the home, ceiling or attic, and mount
the amplifier at a central location. The amplifier installs vertically with the hardware supplied. It has 2 indicators, one for
'Power On' and one for "Fail". The 'Fail'
light comes on if the exterior aerial and the interior aerials are too
close to each other, in which case feedback will occur. (easy to adjust
by moving the aerials or unit). There is a interior panel
aerial provided that attaches to the amplifier for the indoor coverage.
Power up the amplifier using the supplied 5V power adapter. For low
signal areas, you can purchase the optional Higher Gain Yagi aerial for
mobile phone communication. See the
results instantly on your mobile phone!
We do not recommend this unit for more than
10 mobile phone users or larger coverage areas. If that is the case then you need one of our
other more
powerful repeater systems. Please contact us for more information.
|
COMES WITH ALL YOU NEED |
 |
 |
|
CAE50 GSM 1800 Package |
CAE50 GSM 900 Package |
-
High Gain Bi-Directional Low
Noise Amplifier
-
High Gain External Panel
Aerial
-
10 meters of low loss cable
complete with connectors already attached
-
Wall Pack Power Supply (UK)
-
Internal Aerial
-
Instructions
|
-
High Gain Bi-Directional Low
Noise Amplifier
-
Roof Mount Hi Gain Aerial
-
10 meters of low loss cable
complete with connectors already attached
-
Wall Pack Power Supply (UK)
-
Internal Aerial
-
Instructions
|
Typical Installation
Instructions
1. Install External aerial
2. Install Amplifier inside at convenient location on a wall. Attach
Panel Aerial on the 'Mobile' side of the amplifier.Make sure 120V available to connect power transformer (do not
power up)
3. Run cable from external aerial to the 'Base' connector on the
Amplifier
4. Check all cables and power up amplifier.
5. Rotate Yagi/Panel aerial for best signal inside.
NOTE: The system can handle 10
mobile phones in call at the same time. Also, our estimated
signal strength outside your home at roof level must be 3 bars or
greater on your mobile phone (-75dBm). Please contact us If you are in
any doubt which system is for you, or require any other information
email us at :