For Buildings from 1,500
Square Meters up to 20,000 Square Meters
This system is ideal for
medium to large applications including warehouses, factories, large offices
and any other open area building. At the heart of this package is
the high gain Bi-Directional Amplifier. The external aerial takes the
outdoor GSM signal indoors, where the amplifier boosts it and
distributes internally to wherever signal is required by a network of
ceiling or wall-mounted indoor aerials.
The CAE600/800/1000 suite of products
provides bespoke solutions for all types and sizes of buildings.
The CAE600 is engineered to support buildings from 1,500 to 2,500 square
meters.
The CAE800 is for larger situations involving from 1,500 to 10,000
square meters size
Finally the CAE1000 covers from 15,000 to 20,000 square meters (40
floors).
As each situation has to be treated on its
own merits, Mobile Aerial always advises that a site survey is carried out
in the first instance to ascertain signal levels inside and outside the
building. A technician will take readings and propose a solution based
on the findings. A detailed report will be provided and if a site plan
is available the proposed GSM repeater coverage will be superimposed on
the plan and given back to you as part of the report. A full
installation service is offered.
Email us at
|
Package |
Coverage Area
(Square Meters) |
Maximum
Floors
/Areas |
Max # Mobile Phones |
|
CAE-600/800/1000 |
1,500-20,000 |
1-40 |
200-2,000 |
|
FOR
CAE600/800/1000 Repeater System Pricing please contact
our sales department or
Please Email us at
COMBINATION SYSTEMS AVAILABLE |
|
All CAE600/800/1000
Repeater Systems come with all
you need to get the system working. Parts include:
- High Gain In-Building Amplifier
- Yagi Directional Aerial
- Ceiling Mounted Omni Directional
Aerials
- Cables of 30 m type LMR 400 low loss
with connectors already attached. This connects from amplifier to
External Aerial
- Power Supply for the Amplifier
Connect together with the supplied
cabling as follows:
|
 |
 |
Typical Installation
Instructions
1. Install External Aerial on Roof.
(Panel aerial for PCS, Yagi aerial for all others)
2. Install Amplifier inside at convenient location. Make sure 120V
available to connect power transformer (do not power up)
3. Run cable from External Aerial to Amplifier
4. Locate the Internal Aerial install on ceiling (or wall) and connect
cable from aerial to Amplifier.
6. Check all cables and power up amplifier
7. Rotate External Aerial until maximum signal strength on phone inside the
building in the area covered by the internal aerials is achieved.
8. Securely Fasten External Aerial.
|
|
FAQ: I don't know which
system my mobile phone carrier is on, 900 or 1800. Can you help?
We do! Email us at
We will email you the frequencies your provider is on.
My cellular company is on both the 900
and 1800 systems. Which CAE600 system should I get?
In most cases in Europe, 900 Mhz systems are the primary when a carrier is on both. However in some countries like the Netherlands, the 1800 system can be the primary. Use 900 when you know the carrier is on both, and when in doubt, email us...unless
you want to buy both ;)
Do I need to know where the
mobile phone tower using this system is?
No. With the Yagi exterior aerial, all you have to do is
rotate it on the pole until the signal strength is at a maximum
inside the building. .
Do I need to connect my mobile phone directly to
the repeater with a cable or adapter?
No. The system is completely wireless.
I can make a call outside my home, but can't
inside. Will the CAE600/800/1000 system help?
Our building repeater systems are designed especially for this
situation.
Are the CAE600/800 Repeater systems
CE/ITSI approved? : YES
|
